Ontario Compressor Supplies Ltd. - Lubricated Reciprocating Two-Stage Compressors

Products - Lubricated Reciprocating Two-Stage Compressors

The 3 - 30 HP Series... a type and size for your application.

[Quality] Reciprocating compressors are prime examples of Gardner Denver quality... quality without question... from their tough exteriors to their rugged hearts.

These durable compressors are available in many models from 3 to 30 HP and with a wide choice of options and features to match your needs exactly with a customized installation. They are available in vertical and horizontal configurations, tank mounted or base mounted, and gas or diesel powered models allow you to take one anywhere.

Sturdy cast iron crankcase construction and tough cast iron or cast iron-lined domed cylinders eliminate head gasket concerns and greatly improve compressor efficiency. Valve discs are precisely machined of select Swedish steel and crankshafts are of hard ductile iron. The result is long, trouble-free service with unequaled operating efficiency.

The pressure libricated compressors are capable of achieving higher discharge pressures (250 PSIG). Available from 3 to 30 HP in simplex and duplex tank mounted versions as well as base mounted. An engine driven unit is also available.

Splash Lubricated... In 3 to 30 HP

- Shown here are just a few of the many models available -
	Optional Features Constant speed control Dual control LOLC (Low Oil Level Control) Air or water-cooled aftercoolers (electric units only) Automatic drain valve (pneumatic or electric timed) Magnetic starter (available in several enclosures) Automatic alternator controls (for two units) Variety of gasoline engine brands Diesel engine availability on several models
	Available Configurations Vertical or horizontal tank mounted Base mounted (less air receiver) Duplex tank mounted Electric or engine driven Bare compressor pump

Click Here to take a closer look at the Splash-Lubricated Reciprocating Compressors.

[Back to Top]

Pressure Lubricated... In 3 to 30 HP

Two-stage, air cooled, 250 PSIG capability for higher pressure requirements.

Pressure lubrication to crankshaft and connecting rod bearings for longer bearing life. Heavy duty cast iron lined or solid cast iron domed cylinders with integral heads. Replaceable babbitt bearing on connecting rod (crankshaft end) makes repairs easy and inexpensive. Swedish steel, single unit disc-type valves with large porting design for maximum efficiency, trouble-free operation and extended life. Positive displacement oil pump externally mounted and easily removed as a unit for ease of service. Balanced crankshaft with integral counterweights for smooth operation. Oversized tapered roller bearings on crankshaft for maximum life. Hydraulic unloader for easy, loadless starts and low oil pressure protection for unattedned operation, with factory set pilot valve. Balanced low and high pressure domed pistons for smooth operation. High strength, light weight aluminum connecting rods minimize vibration. Needle bearing for piston pin provides longer life.		Optional Features Constant speed control Dual control LOLC (Low Oil Level Control) Air or water-cooled aftercoolers (electric units only) Automatic drain valve (pneumatic or electric timed) Magnetic starter (available in several enclosures) Automatic alternator controls (for two units) Variety of gasoline engine brands Diesel engine availability on several models
	Easily visible oil pressure gauge on bearing carrier. Oil inlet screen in center of crankcase protects bearings from larger debris. Finned tube intercooler for imprved efficiency. Heavy duty intake filter silencers are standard and easily changed when dirty. Large diameter cast iron flywheel with fan-bladed spokes for maximum cooling and smooth operation.	Available Configurations Vertical or horizontal tank mounted Base mounted (less air receiver) Duplex tank mounted Electric or engine driven Bare compressor pump

[Back to Top]

Quality Without Question

The Gardner Denver Assembled Unit
5-Year Pump Warranty

Each new Gardner Denver Assembled Unit has a five (5) year warranty on the compressor pump only, against defects in material or workmanship under normal use and service, from the date of installation or sixty-six (66) months from the date of shipment by Gardner Denver or a Gardner Denver distributor whichever may occur first.
The five-year extended warranty will be prorated over the five years as follows:

Year One - 100% coverage on parts, labor

Year Two - 90% coverage on parts, labor

Year Three - 80% coverage on parts, labor

Year Four - 70% coverage on parts, labor

Year Five - 80% coverage on parts, labor

(Head valves are warranted for first year only)

Gardner Denver makes no warranty on components and/or accessories furnished to Gardner Denver by third parties, such as electric motors, gasoline engines and controls. These are warranted only to the extent of the original manufacturer's warranty to Gardner Denver. Electric motors must be equipped with thermal overload protection to have warranty consideration.
The extended five-year warranty will aplly to ASME air receivers if they are installed on rubber-vibro insolator pads or approved equivalent.

Express Limited Warranty
Warranty shall not apply to any equipment which has been subjected to misuse, neglect or accident, nor shall it apply to any equipment that has been repaired or altered by any person(s) not authorized by Gardner Denver. Failure caused by lack of proper maintenance is not covered by warranty.
In no event shall Gardner Denver be liable for consequential damages or contingent liabilities arising out of failure of any compressor or part to operate properly.
When a compressor pump or component is changed or replaced during the warranty period, the new/replaced item(s) is warranted for only the remainder of the original warranty period.
For more warranty details, please refer to Warranty Page in Operating Manual or seperate Warranty Sheet.

[Back to Top]